What should I pay attention to when using a pipeline?
The line is now very high utilization, the fence to ensure that the conveyor belt is always working, then what should we pay attention to when installing rollers and rollers? Let's see together today.
Must meet the following requirements: (assembly line manufacturers)
First, and then the rack is fixed on the foundation or floor. Belt conveyor fixed, can be set to feed and discharge device.
Second, the hanging conveyor belt hanging conveyor belt, the first belt conveyor belt paved in the idler section of the roller, surrounded by the drive roller, and then deposited in the heavy section of the roller. Hanging tape can be used 0.5-1.5t hand winch. When tightening the strap, the drum of the tensioning device should be moved to the limit position and the trolley and the helical tensioning device should be pulled towards the transmission. The vertical tensioning device should move the drum to the top .
Third, all rollers must be lined up, parallel to each other, and maintain horizontal.
Four, all the rollers in parallel, parallel to each other. Before tightening the conveyor belt, the gear unit and the motor should be installed and the tilting conveyor fitted with the brake. Belt conveyor installation, the need for idle test machine.