In many factories, in the use of belt assembly line equipment to really improve work efficiency, no problems, but also need to pay attention to the method of operation, in order to avoid the use of belt assembly line equipment can not be used normally.

The following is to share the operation method of belt assembly line equipment.

Before the operation of the belt assembly line, it is necessary to confirm that the belt line equipment, personnel and transported items are in a safe and sound state.

Secondly, check the normal movement of all parts without foreign bodies, check whether all electrical lines are normal, normal belt line into operation.

Then check that the difference between the supply voltage and the rated voltage of the equipment is no more than ±5%.

In the belt assembly line operation, the following operations must be carried out:

1. Turn on the main power switch to check whether the device is powered on properly and whether the power indicator is on. Go to the next step.

2. Switch on the power switches of each circuit to check whether the circuit is normal. In normal state, the equipment does not work, the belt line running indicator light is not on, the power indicator light of the inverter and other equipment is on, and the display panel of the inverter is normal (no fault code is displayed).

3. Start each electrical device in turn according to the process flow. Start the next electrical device after the previous electrical device starts normally (the motor or other devices have reached normal speed and status).

Belt-type assembly line stops running, press the stop button to cut off the total power supply until the system stops completely.