Assembly line is a common equipment in our industrial production, conveyor belt is one of the key parts of the transmission equipment, especially in the assembly line operation, conveyor belt transport is a very important part. Extending the service life of conveyor belt is not only to save costs for enterprises, but also to strive for more benefits for enterprises in the same time. So how to use to prolong the life of the transmission line?
The correct use of the pipeline can extend the service life of the transmission line:
1, avoid conveyor belt load start.
2, conveyor belt deviation, should take timely measures to correct.
3. Conveyor belts of different types and standard layers should not be connected together, and their joints should be glued together.
4. The type, structure, standard and number of layers of ordinary conveyor belt and special conveyor belt should be reasonably selected according to the application conditions.
5, the conveyor belt running speed should not be greater than 2.5m/s, large lumpiness, large wear of materials and the use of fixed unloading equipment should be selected as far as possible at low speed.
6. The connection between the diameter of the driving drum of the roller conveyor and the cloth layer of the conveyor belt, the matching of the driving drum and the reversing drum as well as the requirements for the groove Angle of the roller should be rationally selected according to the design rules of the conveyor.
7, the feeding direction should be along the running direction of the conveyor belt, in order to reduce the impact of material falling on the conveyor belt should be adopted chute, reduce the material drop distance; Conveyor belt material section, should shorten the roller distance and the selection of buffer roller for leakage conveyor belt comply with the selection of soft moderate baffle, so as to avoid the baffle plate hard, scraping the belt surface of the conveyor belt.
8, conveyor in use, if there is a lack of roller, should be timely increased and repaired; The roller is covered by material, forming a reverse ineffective, avoid leakage stuck between the roller and the belt, pay attention to the lubrication of the conveyor belt moving part, but not greasy conveyor belt.
9. Avoid the belt being blocked by the frame, pillar or block material, avoid breaking and tearing. When it is found that the conveyor belt is partially damaged, use artificial cotton to repair it in time to avoid expansion.
How to use the above to extend the life of the transmission line is introduced here. The conveyor belt directly affects the overall progress of the project. Reasonable management and application will improve the power of the project and reduce the use of human resources of the enterprise.