Belt line assembly line is a kind of production line, the main use is more common, it can transport a variety of raw materials, not only can transport a variety of plate materials, but also can transport a variety of paper boxes, packaging bags and other parts of the net weight of relatively light goods, can also be used to large and medium-sized supermarket products at the checkout.
Actual operation of belt line line
Before the belt assembly line operation, Z should first determine the transmission belt line machinery and equipment, staff, transported objects are in a safe and intact situation; Second, check all the fitness position is normal without dirty things, check all the electrical equipment route is not normal, all normal can be put into operation belt line funds. Finally check the difference between the working voltage of the power supply system and the rated current of the machine and equipment is not more than ±5%.
In the transmission belt line operation capital investment, be sure to carry out the following practical operations:
1. Cover the main power supply and main switch, check whether all the equipment switching power supply is normal and whether the indicator light is on. Carry out the next practical operation after everything is normal.
2. Cover the main power switch of each control loop and check whether everything is normal. When everything is normal, it is: the machine and equipment are not in position, the transmission belt line operation indicator light is not on, the indicator light of the frequency conversion governor and other machine and equipment is on, and the control panel of the frequency conversion governor shows that everything is normal (there is no problem with the code).
3. Run each electrical equipment successively according to the production process. After the previous electrical equipment runs normally (the motor or other machine equipment has achieved all normal speed and all normal conditions), start the operation of the next electrical equipment.
In the operation of the belt line, it is necessary to follow the requirements of the object in the design scheme of the conveying object, and to follow the working ability of the design scheme of the belt line. Second, we should pay attention to all kinds of staff can not touch a part of the fitness movement of the transmission belt line, layman staff can not casually touch electrical components, control buttons, etc.. Finally, in the transmission belt line operation can not be on the frequency conversion governor follow-up short circuit, such as clear maintenance must be in the termination of the frequency conversion operation can be carried out, otherwise it is likely to destroy the frequency conversion governor. The operation of the transmission belt line is terminated, and the main switching power supply can be disconnected only after the termination of all system software.
Belt line assembly line saves manpower and improves work efficiency on a very large level. Therefore, it is used by large enterprises and occupies a very large sales market.