Belt assembly line is a kind of assembly line, occupy a large market, so each large enterprises have been transformed, with assembly line to save labor and improve work efficiency. It can transport a wide variety of materials, not only can transport a variety of bulk materials, but also can transport a variety of cartons, bags and other single weight lighter products, but also can be used in large supermarkets cash register goods transport, widely used.

The belt assembly line rack is made of aluminum profiles. The aluminum profiles are connected together according to the design drawings, and then the connecting part is fixed through screws. Roller is installed at both ends of the conveyor surface of the belt assembly line, which is convenient for the circulation operation of the belt conveyor line. After the roller is installed, the belt assembly line can be installed on the conveyor rack. The foot cup is installed at the bottom of the transport frame of the belt assembly line to prevent the friction and wear at the bottom, and at the same time, the height of the whole belt transport line can be adjusted properly through the foot cup to meet the demand of production.

A adjusting screw is arranged at the bottom of both ends of the frame of the belt assembly line to adjust the conveying slope of the belt conveying line. The transport speed of the belt assembly line can be adjusted according to the production demand, which requires the governor to be installed on the transport rack. The position of the governor is close to the electric control box, so as to facilitate the connection of the circuit of the two. After the manufacturing device of the above five processes, a belt conveyor line can be manufactured to adjust the delivery slope, and then the equipment can be packaged with packaging materials.

Before the belt assembly line runs, it should be acknowledged that belt equipment, personnel and transported items are in safe and intact condition. Secondly, check the normal movement of the parts without foreign bodies, check whether all electrical lines are normal, normal can be put into operation belt line. Finally, check that the difference between the supply voltage and the additional voltage of the equipment does not exceed ±5%. This is still a need to pay attention to use, to avoid the wrong use.