T-slot identification plate parameters:

Model: GAP28-08

NW single weight: 102 g (g)/ m

Packing Quantity PQ: 100 PCS/package

TW: 40 kg/bag

Package size PD: 4 meters

Material: PVC

T slot identification card application:

It can be cut freely to the required length. It needs to be used with GAP28-04. It can be used in fluent rack, material rack, worktable and other occasions.

What are the requirements for identification card production of its materials?

1, aluminum alloy profile logo requirements:

Aluminum alloy profiles and common plastic accessories should meet the quality requirements of aluminum alloy plate profiles. The Angle base deviation of aluminum alloy profile is less than positive and negative deviation 1 degree. Plane clearance <=0.4%*B(B is the width of the profile).

2, acrylic signs processing requirements:

Acrylic mold hot bending forming, size and shape, no bubbles and scratches on the surface. After hot bending, the surface is processed with coarse sand, fine sand and grinding to ensure smooth surface without steps. After finishing, the surface luster is soft and uniform, no particles, no bubbles, uniform light transmission.

3, stainless steel process requirements:

Stainless steel plate shall be planed pit bending welding (stainless steel plate shall be planed pit after bending, to ensure the edge straightenness); Ensure that the arc Angle R at the bending is <1MM. Remove oil stains on the surface before welding to reduce defects such as virtual welding, porosity and cracks. After welding, all visible welds will be polished smooth, as smooth as the surrounding surface, without obvious scratches.

4, paint baking process requirements:

Adopt environmental protection type high quality paint baking paint processing. Room of paint that bake must do not have dust particle workshop, coating of paint surface that bake 3 besmear 3 bake processing, coating thickness is greater than or equal to 35 micron. Paint color should meet the requirements of the design scheme. The paint film should be smooth and uniform, without flow marks, wrinkles, orange peel, bubbles, inclusion and other defects that affect the decorative effect.

5, screen printing process requirements:

The screen screen is made with alcohol or white electric oil. The screen color should meet the requirements of the design scheme, and the font and pattern strokes should be clear without deformation, serration and other defects. There is no obvious infiltration phenomenon between the color of screen printing graphics and background color.