Parameters of double base wire rod:

Model: GA28-06A

NW single weight: 875 g (g)/ m (m)

Packing Quantity PQ: 8 PCS (set)

Single root length L: 4 m (m)

Aluminnum Alloy 6005T6

The simple adjustability of wire rod products can easily adjust the height of wire rod products, so that each operator can be in the best position of operation. So what are the manufacturing tools and assembly principles of wire rods? Understand together below!

Wire rod products in the production, the need for tools is relatively few, mainly cutting tools and fastening tools.

1. Bench band sawing machine -- cutting plastic tube and metal raceway. When there are a lot of materials to cut, band sawing machine can be used to cut, its power is relatively high. When cutting, we must pay attention to the clamping of plastic tube and slide to prevent damage to the saw blade. Saw blade cut the fracture is relatively smooth, basically do not need to use burr repair tools, and high cutting power.

2. Grinding wheel cutting and starting up -- similar to bench band sawing machine, but with poor cutting quality and many fracture burrs, it needs refurbishment.

3, hand-held hacksaw - a few cutting metal raceway and plastic pipe cover when used, and band saw machine similar role, but relatively low power.

4. Hand-held pipe cutter -- used for cutting plastic covered pipe, its power is not high.

5, steel ruler/steel tape measure -- used for measuring.

6, hex wrench - used for fastening standard parts (standard chuck hex screws).

7, rubber hammer - used for the installation of wire rod structure to hit, can not use metal hammer.

8. File -- used to repair the burr on the material after cutting.