产品banner
Products
Professional on-site production equipment manufacturer
Current location : Home >> Products >> New product series

Strengthen the external direct head

2022-03-18 18:06:02
times
Strengthen the external direct head
Details:

Enhanced external direct head parameters:


Model: GAJ28-A14


NW single weight: 85g (g)


PQ: 108 sets (set)


Packing weight TW: 9.5kg (kg)


Packing size PD 300*220*150 (mm)


Aluminnum Alloy ADC12




First, if the bar joint in the work, there is obvious shaking phenomenon, then we need to adjust the bar box, box position is generally under the workbench, and together with the slider. The travel of the wire rod should be changed frequently, not always use the same place, or over a long time, the guide rail of lean tube will wear very badly. Errors may occur if the workpiece is processed with large stroke.




Two, the bar joint box is also located under the workbench, often take out the box to scrub, and the inside of the oil is also cleaned, the box is not adjusted too tight. This will increase the amount of wear, wire rod often add lubricating oil, especially the guide rail, dovetail groove, and the position of the lead screw!




Three, received wire rod connector products, we should use clean cotton cloth, metal wire rod guide surface, screw all wash again, and then coated with machine lubricating oil, and in the use of wire rod products before, we need to go to bar the handwheel place into the right amount of lubricating oil, as much as possible to ensure the cleanness of machine tool guideway. After Z, don't forget, before coming off work, clean up the iron pin on the working table carefully, and keep it clean!



image.png