Analysis of the operation method of assembly table
1. Component-level equipment pipeline: the parts of the processor are segmented and then connected to each other. It allows operations to be pipelined. This equipment pipeline is also called the operational equipment pipeline.
2. Processor-level equipment pipeline: also known as instruction equipment pipeline. It is to process the execution process of an instruction according to the flow method, that is, the execution process of an instruction is decomposed into several sub-processes, and each sub-process is performed in an independent functional component.
3. Inter-processor device pipeline: also known as macro device pipeline. It is the serial connection of multiple processors to process the same data stream, and each processor completes part of the entire mission.
The placement of the working place of the equipment assembly line should conform to the process road. When the process has more than two working places, the placement method of the same working place should be considered. Generally, when there are two or more even numbers of similar work places, we should consider the use of double row placement, placing them in the transport route of the two cases. But when a worker is guarding more than one piece of equipment, consider keeping the distance the worker moves as short as possible. The selection of equipment line equipment is confirmed according to product skill requirements and equipment process methods. Correct selection of equipment line placement process equipment and tooling, not only forward production power, reduce manufacturing costs, but also make equipment line placement process rationalization. Selection of equipment line equipment to consider the problems include: product production outline; Product quality requirements; Advanced equipment; Equipment reliability; The price of equipment; Material activities are completed by shipping. Material transportation is indispensable in the factory, we should choose economical and reasonable transportation method. Can draw such a concept: the amount of material movement depends on its production factors, equipment line placement is necessary to ensure the shortest distance of material flow, and has been continuously to the end of the product equipment line flow to establish a control system to ensure material activities.
Introduction to the working table of pipeline equipment
1. Set the main power switch on the right side of the cabinet under the device to open. Then, the power indicator is on.
2. Press the power switch button on the control panel, the display of wind speed series lights up, and the whole machine is on standby for power.
3. Select the wind speed adjusting key to the corresponding wind speed series according to the need. At this time, the fan is initially working and the noble clean air is gradually sent out.
4. According to the light button, the fluorescent lamp start, and then according to the light button, the fluorescent lamp off.
5. Press the ultraviolet sterilization lamp button to start the ultraviolet sterilization lamp, and then press the ultraviolet sterilization lamp button to turn off the ultraviolet sterilization lamp.